[OAUGNet]-Re: Looking for a possible solution to using a alternate part on a bom without creating a bunch of ECO's

["Mcpeak, Matthew" <vxsmimmcp@SUBARU.com>]

>>  So we are looking to have a solution that allows us
to use a temporary part on a bom without revising it but have all new
work orders created use this new temporary part.

Oracle allows alternate BOMs, as has been mentioned.  It also allows you
to define substitute items on BOMs.  But I think it is difficult to
recommend an answer to John's question without knowing a few things:

1) How do the work orders get created?
2) How does the person picking for each work order know what to pick?
(Substitute items don't show up on the standard picking reports)
3) What costing model do you use (average, standard, etc)?

- Matt


mcpeakm@tempus-consulting-group.com





-----Original Message-----
From: OAUG Net listserver [mailto:OAUGNet@oaug.com] On Behalf Of Jude
Lam
Sent: Wednesday, September 24, 2008 9:19 AM
To: OAUG Net listserver
Subject: [OAUGNet]-Re: Looking for a possible solution to using a
alternate part on a bom without creating a bunch of ECO's

John,

I am no expert in BOM module.  But I have done some conversions in the
past.
If I remember it correctly, there are effective dates for you to put
down the components in BOM.  So will it work for you if you put down the
different effective dates based on your need such as specifying your
original component effective up to certain date and then add the new
substitute component with the appropriate effective dates.  When you no
longer need it, then you can end date it.

Will this work?

==================================================
Jude Lam, PMP
Tactics Group Incorporated
Mobile: 865-300-4829
Email: jlam@tacticsco.com
http://www.tacticsco.com
==================================================
-----Original Message-----
From: John Wheldon [mailto:john_wheldon@qscaudio.com]
Sent: Tuesday, September 23, 2008 5:24 PM
To: OAUG Net listserver
Subject: [OAUGNet]-Re: Looking for a possible solution to using a
alternate part on a bom without creating a bunch of ECO's

Thank you for the reply. I have setup the alternate BOM in the test
instance and use ECO to update the alternate BOM and WIP jobs without
touching the primary BOM and the jobs that use primary BOM. I am just
curious is there other alternative for this issue.

Best Regards,

-----Original Message-----
From: OAUG Net listserver [mailto:OAUGNet@oaug.com] On Behalf Of
Yagnamurthy, Raj
Sent: Tuesday, September 23, 2008 10:38 AM
To: OAUG Net listserver
Subject: [OAUGNet]-Re: Looking for a possible solution to using a
alternate part on a bom without creating a bunch of ECO's

Did you explore the Alternate BOM possibility? Its is not difficult to
setup. You can try in Test instance and see how it is behaving then
implement as necessary.

HTH,
Raj

-----Original Message-----
From: OAUG Net listserver [mailto:OAUGNet@oaug.com] On Behalf Of John
Wheldon
Sent: Tuesday, September 23, 2008 1:29 PM
To: OAUG Net listserver
Subject: [OAUGNet]-Looking for a possible solution to using a alternate
part on a bom without creating a bunch of ECO's

I was looking to see if others out there run into the same problems my
company has with using alternate parts on a BOM without creating an ECO
to use the other part.  Basically the scenario is this.  We have a bom
to build our product.  Sometimes we need to create a variance to use a
part for a limited amount of time then go back to using the original on
the BOM after that time has expired.  We don't want to rev the BOM to
this part then Rev the BOM back to the original part but we want all
Work Orders to pick up the new part without us having to change it
manually.  That usually works correctly when you rev a BOM but we don't
want to do that.   So we are looking to have a solution that allows us
to use a temporary part on a bom without revising it but have all new
work orders created use this new temporary part.

 

Thanks for any suggestions anyone can chime in with.

John Wheldon
Applications Manager
QSC Audio Products, LLC.

1675 MacArthur Blvd, Costa Mesa, CA 92626

(714) 957-7143 

(714) 754-6132Fax

email: john_wheldon@qscaudio.com

web: www.qscaudio.com

 

This electronic message transmission contains information from QSC Audio
Products, LLC that may be confidential or privileged.  This information
is intended for the use of the individual or entity named above.  If you
are not the intended recipient, be aware that any disclosure, copying,
distribution or use of the contents of this transmission is strictly
prohibited.  If you have received this electronic transmission in error,
please notify us immediately via telephone.


#############################################################
This message is sent to you because you are subscribed to the mailing
list <OAUGNet@oaug.com>.
To unsubscribe, E-mail to: <OAUGNet-off@oaug.com> To switch to the FEED
mode, send any message to <OAUGNet-feed@oaug.com> To switch to the
DIGEST mode, E-mail to <OAUGNet-digest@oaug.com> To switch to the INDEX
mode, E-mail to <OAUGNet-index@oaug.com> Send administrative queries to
<OAUGNet-request@oaug.com>



#############################################################
This message is sent to you because you are subscribed to the mailing
list <OAUGNet@oaug.com>.
To unsubscribe, E-mail to: <OAUGNet-off@oaug.com> To switch to the FEED
mode, send any message to <OAUGNet-feed@oaug.com> To switch to the
DIGEST mode, E-mail to <OAUGNet-digest@oaug.com> To switch to the INDEX
mode, E-mail to <OAUGNet-index@oaug.com> Send administrative queries to
<OAUGNet-request@oaug.com>


#############################################################
This message is sent to you because you are subscribed to the mailing
list <OAUGNet@oaug.com>.
To unsubscribe, E-mail to: <OAUGNet-off@oaug.com> To switch to the FEED
mode, send any message to <OAUGNet-feed@oaug.com> To switch to the
DIGEST mode, E-mail to <OAUGNet-digest@oaug.com> To switch to the INDEX
mode, E-mail to <OAUGNet-index@oaug.com> Send administrative queries to
<OAUGNet-request@oaug.com>


#############################################################
This message is sent to you because you are subscribed to the mailing
list <OAUGNet@oaug.com>.
To unsubscribe, E-mail to: <OAUGNet-off@oaug.com> To switch to the FEED
mode, send any message to <OAUGNet-feed@oaug.com> To switch to the
DIGEST mode, E-mail to <OAUGNet-digest@oaug.com> To switch to the INDEX
mode, E-mail to <OAUGNet-index@oaug.com> Send administrative queries to
<OAUGNet-request@oaug.com>



#############################################################
This message is sent to you because you are subscribed to the mailing list <OAUGNet@oaug.com>.
To unsubscribe, E-mail to: <OAUGNet-off@oaug.com>
To switch to the FEED mode, send any message to <OAUGNet-feed@oaug.com>
To switch to the DIGEST mode, E-mail to <OAUGNet-digest@oaug.com>
To switch to the INDEX mode, E-mail to <OAUGNet-index@oaug.com>
Send administrative queries to  <OAUGNet-request@oaug.com>